Land Pride AR2510
Features
| FEATURES | BENEFITS |
| All Welded 4 x 4 Tubing Frame | Makes for a very strong frame. |
| 4 x 4 x 5/16 Tongue With Clevis Hitch | Built heavy duty to withstand side loads from the tines. |
| Forged & Heat Treated Through Steel Tines | Forged and heat treated tines are very resistant to wear and breakage giving them a long life. |
| Tines | Tines are designed with a twist to lift while fracturing the soil sideways. |
| Bolt-on Tines (2 Bolts Per Tine) | Tines are easily replaceable with 2 bolts per tine. |
| 8" Maximum Tine Penetration | Great penetration for aerating the soil. (Actual penetration depth is dependent on ground condition and added weight.) |
| Heavy Duty Rotary Tine Hangers | Designed to stand up to the rigors of hard rocky soil. |
| Bearings Are Protected With 3/8" Skid Shoes on 3-Sides | Protects bearings against hitting solid objects such as rocks and stumps. (Skid shoe protection is located on the front, bottom and back sides of bearings) |
| Adjustable Rotors | Rotors can be adjusted from 2 1/2, 5 and 7 1/2 degrees to meet customers needs. The greater the angle the harsher the shattering of soil. |
| 7 1/2" Tine Spacing (4/per Spool) AR2596 = 48 Tines Total AR2510 = 64 Tines Total |
Tines spaced 7 1/2" apart provides good coverage. |
| Optional Weights Constructed of 740 lbs. Concrete Blocks With Lifting Lugs Built In |
AR2596 accepts up to 3 concrete blocks and AR2510 accepts up to 4 concrete blocks. Helps Aerator tines penetrate the ground. |
| Optional Harrow Lift Package | Lifts the Drag Harrow off the ground for transporting on roadways. |
| Accessory Drag Harrow | Provides a means to smooth out the ground behind the Aerator. Drag Harrow has three positions it can be used: Drag Mat, Light Penetration & Deep Penetration. |
| Accessory Trailing Hitch | Hitch is self leveling for pulling implements behind the Aerator. |
Specifications
| Model | AR2510 |
| Horsepower requirements | 40 - 250 hp |
| Working width | 9' - 8" |
| Overall width | 10' - 8" |
| Overall length | 10' - 11" |
| Overall height (With tines on the ground) |
41 1/4" Without concrete Blocks 43 7/8" With Optional Concrete Blocks |
| Weight (w/o added weight) | 2,200 lbs |
| Tongue weight | 580 lbs |
| Number of tines | 32 LH and 32 RH (Four per hub) |
| Tine material | Forged and heat treated through steel |
| Tine hub spacing | 7 1/2" |
| Tine penetration | Up to 8" (Depending on ground conditions and added weight) |
| Frame construction | 4 x 4 tubing all welded construction |
| Hitch type | Heavy duty pull type with clevis hitch Receives up to 1 1/4" pin dia. (2-positions) |
| Main tongue beam | 4" x 4" x 5/16" Wall tubing |
| Hitch jack | Tongue support jack (5,000 lb. load rating) (Stores on pull frame) |
| Rotor/tine support hangers | Heavy Duty |
| Rotor bearings | Heavy Duty greasable bearings with triple lip seals |
| Rotor bearing protection | Bump Guards |
| Rotor angle adjustment | Angles from 2 1/2, 5 & 7 1/2 degrees |
| Manual storage tube | Included |
| Tires | 2 ea., 9.5L x 15, 8 ply |
| Rims | 6-bolt |
| Tine depth control | Add cylinder donuts to cylinder rod - included |
| Hydraulic couplings | Quick disconnects included |
| Hydraulic cylinder | 3" x 8" stroke with 1 1/4" rod dia. |
| Transport lock | Manual cylinder lock |
| Rear axle pivot | Greasable |
| Options | |
| Concrete blocks | 25" square x 18" high |
| Number of concrete blocks | Available in quantities of 2, 3, or 4 |
| Weight per concrete block | 740 lbs. |
| Lifting bar | 1/2" Round bar built in concrete block |
| Drag Harrow | See Drag Harrow Operator’s Manual 322-207M for a complete list of specifications. (Order model DRG08 as a stand alone unit.) |
| Weight | DRG08 = 185 lbs. |
| Settings | Three positions: Light, Medium, and Aggressive |
| Drag Harrow Lift | Can be added to lift Drag Harrow off the ground without getting off the tractor. Drag Harrow sold separately. |
| Weight | 345 lbs. |
| Hydraulic cylinder | 2" x 8" stroke with 1 1/8" rod dia. |
| Transport lock | Included |
| Slow moving vehicle sign | Included |
| Accessories | |
| Trailing hitch | Self leveling (Buy through Parts, part no. 325-118A) |
| Corner protector | Protects straps from concrete corners (Buy through Parts, part no. 816-646C) |
Join our Mailing List