Land Pride RCFM4014
Double tap to zoom
|All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing
|High gearbox HP rating||Gearboxes are built rugged. See Specifications for actual Gearbox HP ratings.|
|3 Gearboxes||Allows equal torque to be spread to left and right gearbox.|
|Spined blade hubs||Spined blade hub offers tight non-slipping attachment to gearbox output shafts.|
|High blade tip speed||Means cleaner cutting. See Specifications for actual blade tip speeds.|
|Spring loaded torque
dampeners between the center
and outboard gearboxes
|Protects the driveline and gearboxes from hard objects in the blade path and resets to
prevent blades from hitting.
on main driveline
|Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.|
|Cat. 2 and Cat. 3 Hitch||Fits a wide range of tractors.|
|10 Gauge deck, fully welded||Fully welded deck adds rigidity.|
|1/4" Thick sidewalls||Protects sidewalls from thrown objects.|
|Round back design||Allows for cleaner and efficient discharge of material, helps eliminate damage to rear
corners by not sticking out.
|Full length skids with
reversible & replaceable shoes
|Adds reinforcement to side panels. Reversible and replaceable skid shoes allow for change
before wearing through to weld-on piece.
|Laminated tires||Laminated tires can handle almost any condition and don’t go flat.|
3/16" Round stump jumper
1" x 5" Blade bar
|Stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
|1/2" x 4" Heat-treated blades||Heat-treated blades last longer than non-heat-treated blades|
|3" Diameter cutting capacity||Aids in cutting brush.|
|Shredder Kit Options
Without fixed blades
30" row spacing
38" & 40" row spacing
|Good for Shredding row crops into small pieces. All kits include baffles to help maintain
shredded material in each section of the cutter for a consistent rear discharge.
Good for any row width.
Good for 30" row spacing. Includes fixed blades to reduce stalks into smaller pieces.
Good for 38" & 40" row spacing. Includes fixed blades to reduce stalks into smaller pieces.
|Front rubber or chain guard
options and rear metal band,
rubber, or chain guard options
|Reduces flying debris.|
|Three Tailwheel Option||Third tailwheel helps protect against scalping the ground on uneven terrain.|
|Specifications & Capacities||RCFM4014|
|Weight With dish pan option, front rubber guard, & rear metal guard||3,350 lbs.|
|Hitch||3-Point category 2 & 3|
|Cutting width||14' - 0"|
|Overall width||14' - 6 1/2"|
|Overall length||10' - 0 1/2"|
|Cutting height||2" - 12"|
|Tractor horsepower rating||80 hp minimum|
|Gearbox rating horsepower||T-box - 250 hp, outboard 210 hp|
|Gearbox||1000 rpm power take-off driven gearbox with cast iron housing and beveled gears|
|Gearbox input/output shaft size||Input shaft = 1 3/4" - 20 spline
Output shaft = 1 3/4" dia.
|Gearbox lubrication||80-90W EP Gear Lube|
|Gearbox oil capacity
|Deck material thickness||10 Gauge|
|Deck side skirt thickness||1/4"|
|Skid shoes||Replaceable and reversible|
|Tailwheels||6" x 9" x 21" Laminated caster|
|Wheel bearings||Tapered roller bearing in cast iron hub|
|Intermediate driveline||Cat 4 with spring loaded torque dampener|
|Blade bolts||Keyed with harden flat washer and locknut|
|Blade tip speed
At center T-box
At outboard gearboxes
Intermediate Blade options Dish pan Shredder kit, 30" row Shredder kit, 38" & 40" row Shredder kit w/o fixed blades
1000 rpm - 4 plate slip clutch, Cat. 5
Spring-loaded flex coupler Options 1/2" x 4" Heat treated free-swinging suction blades with 3/16" round stump jumper Double stacked shredder blades with fixed knives & baffles, for 30" row spacing Double stacked shredder blades with fixed knives & baffles, for 38" & 40" row spacing Double stacked shredder blades with baffles, works on any row width
|Blade options Dish pan
Shredder kit, 30" row
Shredder kit, 38" & 40" row
Shredder kit w/o fixed blades
|1/2" x 4" Heat treated free-swinging suction blades with 3/16" round stump jumper
Double stacked shredder blades with fixed knives & baffles, for 30" row spacing
Double stacked shredder blades with fixed knives & baffles, for 38" & 40" row spacing
Double stacked shredder blades with baffles, works on any row width
|Front guard options||Optional: Rubber deflector or single chain guard|
|Rear guard options||Optional: Metal guard, rubber deflector, or single chain guard.|
|Tailwheel options||Optional: 2 tailwheels or 3 tailwheels|
|Breakaway light kit||6 pin hook-up connector, amber lights facing forward, amber & red light facing rearward
Lights are mounted on a spring-loaded, self-return, pivoting breakaway mount.
Join our Mailing List