Land Pride RCGM3715
Double tap to zoom
|Surpassed rugged industry standards||All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures according to ISO 4254-13.
|Factory assembled||Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit.|
|Rugged heavy built gearboxes||Capable of handling heavy cutting applications.|
|Gearbox seal protection||Gearbox bottom seal protection for longer bearing life.|
|2 Piece driveline shields||Driveline grease zerks are easier to access.|
|Low hitch weight on tractor tongue||Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.|
|Narrow A-frame hitch||Allows for a tighter turning radius.|
|Adjustable park jack angle||Park jack can be adjusted to be perpendicular to the ground.|
|Adjustable driveline hanger||Serves as support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to tractor power take-off shaft.
|Input driveline: Cat. 6 CV||Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.|
|Drivelines with slip-clutches: Cat. 4 intermediate Cat. 4 or Cat. 5 wings||Driveline is sized right for the intended cutting capacity. Slip-clutches will
slip under load to minimize twist damage to driveline profiles.
|Grease zerks on end caps of driveline||Intermediate and wing driveline cross journals are easier to grease.|
|High blade tip speed||Allows clean cutting of material.|
|6" Blade overlap||Eliminates skipping during turns.|
|3/16" Round stump jumper||Standard thick stump jumper material keeps damage to a minimum.|
|Smooth top design||Reduces accumulation of debris and is easier and faster to clean.|
|Tops of decks are 100% welded||Makes center decks and wing decks stronger.|
|1/4" Sidewall thickness||Increased thickness reduces damage from objects being thrown into deck sidewalls.|
|Beveled skid shoes on wings||Reduces gouging the ground when turning.|
|LED signal lights||LED lights are bright, long lasting, and resist vibration, unlike incandescent lights.|
|Hinged wing sections||Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
|1" Solid hinge rods||Larger diameter hinge rod provides greater strength in the hinge area.|
|Wing transport lock pins||Transport lock pins will hold wings in folded position in the event of hydraulic loss.|
|Enclosed dual 1" leveling rods||Cutter pulls equally on the rear axle while traveling over rough terrain.|
|5-Bolt hubs||5-Bolt hubs makes the wheel assembly more durable and longer lasting.|
|Drain holes in wheel rims||Allows water to drain from wheels mounted on folded-up wings.
Helps prevent paint deterioration and rusting to the wheel rims.
|Spring cushioned center-axle||Protects unit from bumps and ground shock.|
|Replaceable individual wheel spindles||Spindles can be replaced when damaged without replacing entire axle assembly.|
|Wheel options||Laminated tires: Eliminates flats.
Air-filled tires: Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting and can’t go flat.
|LP Performance hitch option||Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
|Bar-tite hitch option||Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.|
|Maintenance free tongue & axle pivots||Self lubricating journal bearings make for less maintenance.|
|Color coded hydraulic hose handles||Easy hose identification & sturdy handle to easily connect & disconnect from tractor.|
|4 lip purgeable metal backed wheel
|Seals make it harder for water & debris to enter the hub and grease to leave the hub.
Metal backing prevents sticks and twine from destroying the seal lips.
|Greasable cast steel continuous hinge||Cast steel hinges make a strong connection & are easy to lubricate.|
|Galvanized decks on RCG models||Durable rust protection for harsh conditions.|
|Specifications & Capacities||RCGM3715|
|Horsepower range||50 - 160|
|Gearbox horsepower||540 rpm or 1000 rpm
160 hp Divider and 130 hp Center & Wings
|Gearbox lubrication||Gear Lube 80-90W EP|
|Gearbox oil capacity||Splitter: 3.5 pints; Center deck & Wings: 6 pints|
|Machine weight Total weight
| Blade tip speed At 540 rpm
At 1000 rpm
|Center Blades = 15,268 FPM & Wing Blades = 15,000 FPM
Center Blades = 15,578 FPM & Wing Blades = 14,620 FPM
|Hitch types||Fixed Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch|
|Hitch jack||Standard (7,000 lbs.)|
7 Pin connector
SAE J560 pin configuration
Transport width with 21" tires
10’-3" (Single acting fold option) 7’-3" (Dual acting fold option)
|Overall length||16'-3" (With center deck raised fully up)|
|Cutting height||1-1/2" - 16" (Varies by tire option)|
|Lift hydraulics||3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers|
|Wing hydraulics||2 1/2" x 12" hydraulic cylinders, hoses & fittings|
|Wing transport protection||Wing Transport Lock Pins|
|Deck material thickness||10 Gauge|
|Side skirt thickness||1/4" Steel|
|Skid shoes||Wing Deck: 1 Replaceable skid shoe per wing
Center Deck: 2 Replaceable skid shoes
|Blades - 6 (2 per carrier)||1/2" x 4" Heat-treated,
free-swinging alloy steel with uplift
|Blade bolt||Keyed with hardened flat washer & locknut|
|Stump jumper / blade holder||3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar|
|Front & rear guards||Optional single row chain or dual row chain|
|Input driveline 540 & 1000 rpm||Cat. 6 with constant velocity u-joint with or without overrunning clutch|
|Intermediate driveline||Standard - Category 4 with slip-clutch|
|Wing drivelines||Standard - Category 4 with slip-clutch or Category 5 with slip-clutch|
|Wheel options||21" or 26" Laminated tires
25.5" New foam filled tires
25.5" New 20-ply pneumatic tires
29" Used aircraft tires
|Number of wheels||4 - Wheels: Two on transport axle and one on each wing axle
6 - Wheel option: Four on transport axle and one on each wing axle
8 - Wheel option: Four on transport axle and two on each wing axle
|Transport axle||Spring-cushioned on center transport axle|
|Hubs||Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts|
|LP Performance hitch & Bar tite hitch pivot shaft diameter||2 1/4"|
|A-frame tongue||5" x 3" rectangular tubing|
Join our Mailing List