Land Pride RBT6010

Features
FEATURES | BENEFITS |
Cat. II and Cat III 3-Point Hitch | Can go from Cat. II to Cat. III 3-point tractor. Enables a wider variety of tractors to be used. |
Blade angles left and right up to 45 degrees hydraulically | Allows the operator to set the blade at the angle of his choice to complete the job with satisfactory results. |
Blade offsets left and right up to 55” hydraulically | Allows the operator to position the end of the moldboard beyond tractor tire and close to solid obstacles such as fences, buildings and abutments. |
Blade tilts up and down up to 15 degrees hydraulically | Allows the operator to do simple tasks such as putting a crown in the middle of a road to making V-type ditches of various sizes. |
Mainframe is fully welded and reinforced | Overall Mainframe strength is enhanced due to being fully welded. |
Heavy-duty pivot assembly with 4 1/2” Diameter solid steel moldboard kingpin | 1” Plate steel turntable and 4 1/2” King pin for handling high torque in this area |
Formed 19” high moldboard | Can move a great deal of material in a short time. |
1/2” Formed Moldboard with 3/8” formed channel reinforcement | Makes it one of the strongest moldboards in its class for handling heavy loads. |
Retractable parking stand | Enables one person hook-up and keeps the mainframe off of the ground. |
Front pivot shaft has two grease points | Helps front pivot shaft to move easily. |
Heavy-duty blade pivot assembly | 1” Plate steel turntable and 4 1/2” kingpin handle tremendous torque delivered by up to 225 HP tractors. |
Skid shoes (optional) | Skid shoes protect moldboard from hitting low lying obstructions such as manhole covers. |
End plates (optional) | End plates allow the blade to hold material in to drag from one spot to another. |
Dual gauge wheels (optional) | Gauge wheels position the height of the blade to aid in grading. |
Specifications
Model | RBT6010 |
Blade Width | 10 ft. |
Weight : Without Gauge Wheel | 2260 lbs |
With Gauge Wheel | 2460 lbs |
Max. Tractor Hp 2-Wheel drive: | 225 HP |
4-Wheel Drive: | 200 HP |
Maximum G.V.W. (lbs.) | 15,000 |
Hitch Type | Cat. II & III (Quick Hitch Adaptable) |
Blade Angle, Hydraulic Operated | Up to 45 degrees clockwise and counterclockwise |
Angle Cylinder | With blade facing forward or reversed |
Blade Offset, Hydraulic Operated | 5" X 18" stroke with 2 1/2" dia. rod |
Offset Cylinder | Up to 55" left and right |
Blade Tilt, Hydraulic Operated | Should not offset when backing-up |
Tilt Cylinder | 5" X 18" stroke with 2 1/2" dia. rod |
Moldboard King Pin Diameter | Maximum 15° up and 15° down with blade facing forward or reversed |
Moldboard Height | 3 1/2" X 8" stroke with 1 1/2" dia. rod |
Moldboard Thickness and Reinforcement | 4 1/2" Diameter solid steel bar |
Cutting Edge | 1/2" x 6" grader blade Heat treated |
Mainframe Construction | Fully enclosed welded, formed box |
Parking Stand | Retractable |
Accessories | Skid Shoes, End Plates, Hydraulic Dual Gauge Wheel. |
Join our Mailing List