Land Pride SBD3596
Double tap to zoom
|Quality heavy-duty gearbox||Durable construction provides long life.|
|Two position hitch vertically||Helps reduce driveline angularity issues when raising the 3 Point arms up.
Allows lower 3 point arms to be positioned more parallel to the ground when in operation.
Top holes in lower clevis make the units quick hitch compatible.
|Adjustable hitch horizontally||HItch can be extended forward for standard 540 rpm without Quick Hitch.
Hitch can be adjusted back for standard 540 rpm with Quick Hitch.
Hitch can be extended forward for optional 1000 rpm gearbox without Quick Hitch.
Hitch can be adjusted back for optional 1000 rpm gearbox with Quick Hitch.
|Large main housing with dual
|Dual augers are capable of making 40" high cuts through large snow drifts.|
|2 1/2" x 3/8" Auger flight||Auger is built heavy-duty to handle heavy work.|
|Large impeller diameter||Has the ability to move and throw large amounts of material farther.|
|Hard steel bolt-on reversible
|Bolt-on blade can be replaced before auger housing becomes exposed to wear. Hardened
steel blades last longer and because the blade is reversible, it can be flipped over to
double the blade’s life.
|Hydraulically gear driven
|Gives the operator the ability to change direction snow is being blown using a hydraulic
control lever, without having to get out of the cab.
|Shearbolt protected gearbox,
drive shaft, impeller, and
|Eliminates costly repairs.|
|Greaseable bearings||Less drag and extends life of unit.|
|Skid shoe wear surfaces are
constructed of AR400 steel
|AR400 steel last longer than mild steel.|
|Skid shoes are replaceable||Bolt-on skid shoes can be replaced before auger side plates become exposed to wear.|
|Skid shoes and adjustable||They can be adjusted to carry the Snow Blower above loose gravel and crushed rock or
set to remove snow close to surfaces such as asphalt and concrete.
|Two skid shoe options||Multiple surfaces allows you to pick the correct skid shoe for your application.|
|Gives the operator the ability to change distance snow is being blown from the discharge
chute using a hydraulic control lever, without having to get out of the cab.
|Tractor Horsepower||85-125 HP|
|Overall Width With Outer Skid Shoe Option||101 1/2"|
|Weight: Includes Hydraulic Deflector Cylinder and Excludes Skid Shoes||1,614 lbs|
|PTO Speed||540 rpm|
|3-Point Hitch Category||Cat. ll & lll|
|Hitch Adjustment||2 Position|
|Quick Hitch Compatible||Yes, except with some large tractors.|
|Main Housing Material||10 Gauge|
|Side Plate Material||1/4"|
|Grader Blade||Bolt-on, reversible, and replaceable hardened steel full length|
|Chute Opening At Base||12"|
|Chute Rotation||220 Degrees (Hydraulically driven sprocket)|
|Impeller Housing Depth||10 1/8"|
|Number of Impeller Blades||4|
|Auger Flighting||3/8" x 2 1/2" (Before rolling)|
|Number of Paddles Per Auger||4|
|Gearbox Oil Capacity & Type||3.59 Pints of SAE 90W Gearlube|
|Drive Chain||#60 RC|
|Driveline Category||Cat. 5, Shearbolt protected|
|Driveline Shearbolt Size||M10 x 1.5 x 55 GR8.8|
|Drive Shaft Shearbolt Size||1/4" -20 Grade 5 bolt|
|1000 RPM Reduction Box||N/A|
|Bolt-on Outer Skid Shoes||Side mounted with AR400 wear surfaces, adjustable & replaceable (32 lbs)|
|Bolt-on Inner Skid Shoes||In-board mounted on the rear with AR400 wear surfaces, adjustable & replaceable. (19 lbs)|
|Deflector: Manual||Standard with manual locking bar (2 lbs)|
|Deflector: Hydraulic||Hydraulic cylinder (32 lbs)|
Join our Mailing List